Need help?Do you have a question about the QEP 60020SQ and is the answer not in the manual?
Instructions for safely positioning the tile saw, including drip loop setup.
General safety warnings regarding operation, including finger and clothing safety.
Steps for setting up the tile saw on a stand or workbench.
Guide for setting the rip guide for 45-degree cuts on the tile saw.
Recommended cutting depth and adjustment procedure for the saw blade.
Recommended speeds and cutting depths for various blade sizes.
General operating procedures for the tile saw after assembly.
Specifications and types of diamond blades suitable for the saw.
Guidelines for safe and effective use of diamond blades.
To Next Page
General
