QEP 700XT User Manual

READ AND FOLLOW ALL SAFETY AND
OPERATING INSTRUCTIONS BEFORE USING THIS SAW.
LIRE ET SUIVRE TOUTES LES DIRECTIVES
DE SÉCURITÉ ET D’OPÉRATION AVANT D’UTILISER CETTE SCIE.
LEA Y SIGA TODAS LAS INSTRUCCIONES
DE FUNCIONAMIENTO Y SEGURIDAD ANTES DE USAR ESTA SIERRA.
TILE SAW
29FG
E200561
READ AND FOLLOW ALL SAFETY AND
OPERATING INSTRUCTIONS BEFORE USING THIS SAW.
LIRE ET SUIVRE TOUTES LES DIRECTIVES
DE SÉCURITÉ ET D’OPÉRATION AVANT D’UTILISER CETTE SCIE.
LEA Y SIGA TODAS LAS INSTRUCCIONES
DE FUNCIONAMIENTO Y SEGURIDAD ANTES DE USAR ESTA SIERRA.
700XT 7" TILE WET SAW
WITH EXTENSION TABLE
OWNER’S MANUAL
SCIE COUPE-CARREAU À EAU AVEC
TABLE À ALLONGE DE 180 mm
MANUEL D'UTILISATION
SIERRA PARA LOSETAS CON MESA DE
EXTENSIÓN DE 180 mm
MANUAL DE OPERACIÓN
22700Q
700XT

QEP 700XT Specifications

General

Blade Diameter	7 inches
Motor Power	1.5 HP
Weight	45 lbs
Arbor Size	5/8 inches
Type	Tile Saw
Power Source	Electric
Max Cutting Depth at 90°	1-1/4 inches
Max Cutting Depth at 45°	1 in
No Load Speed	3, 600 RPM

Summary

General Safety Instructions

Electrical Requirements

Details on grounding, plugs, and circuit requirements for safe operation of the tile saw.

Extension Cords

Assembly

Installing the Blade

Procedure for safely removing and installing the diamond blade onto the saw's arbor.

Installing the Blade Guard

Operation

Before Starting the Saw

Essential checks and preparation steps before powering on the tile saw.

Starting the Saw

Making 90° Rip Cuts

Making 22.5°– 45° Angle Cuts

Making Miter Cuts

Maintenance

Diamond Blade Do's & Don'ts

Essential recommendations and warnings for inspecting, using, and maintaining diamond blades.

Troubleshooting

Overheating of Saw

Diagnosing and resolving issues related to the saw motor overheating.

The Saw Does Not Start

Troubleshooting steps for when the saw fails to power on.