Need help?Do you have a question about the QEP TILE SAW 60707 and is the answer not in the manual?
General| Model | 60707 |
|---|---|
| Voltage | 120V |
| Blade Diameter | 7 in |
| Amperage | 15 Amp |
| Maximum Cut Depth @ 90 Degrees | 1-1/4 in |
Explains the meaning of the six warning symbols on the tile cutter's label.
Highlights critical safety points regarding material, water, and blade type.
Covers clean environment, children, proper attire, and alertness during operation.
Guidelines on using the right tool, securing work, maintenance, and handling cords.
Details on wet hands, power connection, blade cooling, dry cutting, and dust protection.
Instructions for correct blade selection and safe mounting procedures.
Lists model, voltage, frequency, power, speed, dimensions, mass, and noise levels.
Precautions for power supply, cables, plugs, and extension cords.
Details on the diamond blade, blade guard, miter gauge, and parallel guide.
Describes the table, water tank, and switch/motor assembly.
Instructions for mounting the machine and preparing for cuts.
Guides for performing straight rip cuts and 45° diagonal cuts.
Steps for tilting the table to achieve bevel cuts.
To Next Page
