Need help?Do you have a question about the QHYCCD QHY8L-C and is the answer not in the manual?
General| Sensor Type | CCD |
|---|---|
| Sensor | Sony ICX413AQ |
| Interface | USB 2.0 |
| Shutter | Electronic |
| ADC | 16-bit |
| Power Supply | 12V DC |
| Sensor Size (mm) | 22.5 x 15 |
| Sensor Size (alternative mm) | 35.8 x 25.1 |
| Readout Noise | 8 e- |
| Quantum Efficiency | 60% at peak |
| Cooling | Thermoelectric cooling |
Details DC201 power requirements and voltage range for safe operation.
Explains the two-frame readout mode and its implications for image capture.
Discusses how to manage blooming on the CCD chip.
Addresses issues related to dew or frost formation on the CCD chip.
Guidelines for long-term operation and use in remote observatories.
Explains how to protect the cooler from thermal shock and damage.
Details the procedure for cleaning the CCD surface safely and effectively.
Describes how to use and adjust the center and angle adjustment ring.
Steps for installing drivers and initial camera setup.
Step-by-step instructions for using EZCAP software for camera control.
Guide to connecting and operating the QHY8L with MaxIm DL.
Instructions for using AstroART with the QHY8L camera.
How to use the QHY8L camera with Nebulosity software.
Steps for connecting and using the QHY8L camera with APT.
Guide to controlling the QHY8L camera using ImagesPlus software.
Using the QHY8L camera as a guiding device within MaxIm DL.
Explains image formats and how to view/process them.
Procedure for capturing BIAS images for calibration.
Procedure for capturing DARK images for calibration.
Procedure for capturing FLAT images for calibration.
Capturing Dark Flats and combining calibration images.
Lists the key features and technical specifications of the QHY8L camera.
Compares the QHY8L camera with the QHY8PRO model and selection guidance.
Lists and shows the accessories included with the QHY8L camera.
Details the various ports and interfaces on the QHY8L camera.
To Next Page
