BWT20 Qilin double swing handheld laser
25
Gas: When the gas opens, the gas valve port will output 24V voltage, and the gas will
automatically blow without opening during welding.
Send wire: when the wire is opened, the wire sending opportunity is sent during the light.
When the wire is closed, the wire sending machine is not controlled by the welding gun light
signal.
Alarm signal light: provide real-time monitoring and reminder, monitor and alarm the
temperature of laser head, air pressure, welding torch, conduction and
handle. The full alarm state is displayed synchronously on the main
screen and alarm light to remind users and quickly check problems.
Process package: The process package has four common materials, and the thickness and
parameters corresponding to "custom" and "other" are described as follows:
Stainless steel (SUS): "SUS/1.0mm" means: stainless steel 1.0mm, and so on: "SUS/3.5mm"
means: stainless steel 3.5mm
Carbon steel (CS): "CS/1.0mm" means: carbon steel 1.0mm, and so on: "CS/3.5mm" means:
carbon steel 3.5mm
Galvanized plate (SECC): "SECC/1.0mm" means: galvanized plate 1.0mm, and so on:
"SECC/3.5mm" means: galvanized plate 3.5mm
Aluminum plate (AL): "AL/1.0mm" means: aluminum plate 1.0mm, and so on: "AL/3.5mm" means:
aluminum plate 3.5mm
Custom (UDC): can edit parameters, convenient for customers to process for welding at any
time.
Other (OTS): internal manufacturer special process editing, special process can be used
for special material welding.
Click "" to enter the main editing interface. After editing parameters,
you can save the parameters without clicking confirmation.
To Next Page
Loading...