To Next PageTo Next Page
Need help?Do you have a question about the Qilin Laser Application Technology BWT20 and is the answer not in the manual?
Shenzhen Qilin Laser Application Technology Co., LTD. address and phone number.
Details product compliance with EU and US standards.
Explains symbols indicating serious danger or potential injury.
Explains symbols for product risk and important information.
Warning about laser radiation and safety precautions.
Lists all parts included in the BWT 20 system package.
Provides a brief overview of the laser welding system.
Detailed installation dimensions for the touch screen.
Installation dimensions for the control box.
Installation dimensions for the 15V switching power supply.
Shows the wiring diagram of the entire system and control box.
Details the structural diagram and specifications of the gun and pipe interface.
Schematic and description of gas and water pipe connections.
Defines the +15V and DC24V power interfaces.
Describes the HMI interface and its connection.
Defines laser welding head and trigger signal line interfaces.
Introduces fan and wire feeder control interfaces.
Explains wire feeder keys and operational instructions.
Defines signals for laser modulation, enabling, and light control.
Covers gas control and air pressure detection interfaces.
Explains dial switch settings and signal characteristics.
Introduces the main interface functions and operations.
Guides on setting interface functions and operations.
Describes the touch screen, parameter settings, and light control.
Explains gas control, wire feeding, and alarm signal light functions.
Details common materials and thicknesses for process packages.
Configures laser power, frequency, swing mode, and width.
Sets continuous or pulsed light output modes.
Configures light timing and restores factory settings.
Covers calibration, cleaning mode, and other settings.
Guides on setting gas control, start lift, and red light offset.
Covers SN identification, firmware version, and language settings.
Provides reference welding parameters for various materials.
Lists aluminum parameters and formula for power adjustment.
Advises on avoiding interference and handling equipment safely.
Precautions against static electricity and water leakage.
Confirms cable connections and laser head integrity.
Guidelines for laser head maintenance, cleaning, and safety.
Details power supply requirements and safety lock operation.
Outlines warranty period, free maintenance, and contact information.
General| Brand | Qilin Laser Application Technology |
|---|---|
| Model | BWT20 |
| Category | Welding System |
| Language | English |
