80
G
NOTE
• When you remove the bucket, do not touch any parts inside of the unit.
Doing so may damage the product.
• Be sure to insert the dehumidifier body gently all the way into the bucket.
• When you remove the bucket, if there is some water in the unit you must
make the unit dry.
2. Continuous draining
• Water can be automatically emptied into a floor drain by attaching the unit with a
water hose.
• Remove the cover located on the back of water bucket, then remove the rubber
plug. Attach a drain hose and lead it to the floor drain or a suitable drainage
facility.
A. Remove the cover.
B. Remove the rubber plug.
C. Attach the hose to the drain hose outlet.
• Make sure the hose is secure so there are no leaks.
• Direct the hose toward the drain area,making sure that there are no kinks that will
stop the warter flowing.
• Place the end of the hose into the drain area and make sure the end of the hose is
level or downwards to let the water flow smoothly. Do never let it up.
• Make sure the hose is lower than the drain hose outlet.
• Select the desired humidity setting and fan speed on the unit for continuous
draining to start.
G
NOTE
When the continuous drain feature is not being used,remove the drain hose
from the outlet , reinstall the rubber plug and cover.
4
man_D720 Cube ('21) V3.indd 80man_D720 Cube ('21) V3.indd 80 05-07-2021 14:1605-07-2021 14:16
To Next Page
Loading...
Need help?
General
