I ERROR CODE LIST
If the device does not work or works insufficiently:
Check if an error code is visible in the display, refer to the code table for a solution. If no error
code is visible in the display, go through the error table for a possible solution.
Error code Cause Solution
FL Water full alarm
Contact the dealer
E1
System temperature sensor
fault
E2 Room temperature sensor fault
EF Indoor motor fault
Eb Lack of uorine
E4 Freeze protection
J FUSE PARAMETERS
Voltage: 250 V
Current: 3,15 A
Type : T
4
81
To Next Page
Loading...
Need help?
General
