D OPERATION OF CONTROL PANEL
1. Power
Press this key to turn the device on and off.
When the air conditioner is switched on, the temperature is set to 22ºC by default. The tempe-
rature sensor measures the ambient temperature and if exceeds 22ºC, the outdoor unit starts to
work to bring the temperature down. If the ambient temperature already below 22ºC, then the
outdoor unit does not start.
2. Mode
Press this key to select cooling, fan, dehumidification modes;
In standby/turned on mode, by pressing this key for 3 seconds to set timing on/off.
3. Temperature / time adjustment
In cooling mode, press the key to increase or decrease the temperature, the setting temperature
adjustable from 16~30ºC;
In timer mode, press the key to adjust time to turn on/turn off the machine.
Press Up/Down key at the same time to transfer between ºC and ºF.
4. Fan speed
Press the key to choose low/high fan speed.
5. Sleep mode
Press the key to enter or quit sleep mode. After 20 seconds, all lights and the digital display turn
off and the air conditioner goes to sleep. The indoor unit fan continues to run at low fan speed.
6. Display window
Check temperature and time from this window.
7. Swing
Press fan speed and sleep mode key at the same time to turn on/off swing function.
E MAINTENANCE
DECLARATION:
1) Ensure the machine is unplugged before maintenance.
2) Do not use gasoline or other chemicals to clean the unit;
3) Do not wash the unit directly;
4) If the air conditioner is damaged, please contact the dealer or repair shop.
CLEANING
CAUTION: Unplug the power cord before cleaning the maintenance.
1. AIR FILTER
• It is important to regularly remove the dust from the filter.
4
75
To Next Page
Loading...
Need help?
General
