4
78
CHANGING BETWEEN CONNECTION TYPES
To change the unit between the two wifi connection modes, hold the fan button
for 3 seconds.
G SMART HOME WIFI CONNECTION GUIDE
INSTALL APP
Download the "Smart life" app from the Play Store (Android) or App Store (iOS).
REGISTER
If you do not have a Smarter Home account, register or sign in with a verification code sent by
SMS.
To register:
1. Tap to enter registration page
2. The system automatically recognizes your country/ area. You can also select your country
code manually. Enter your mobile phone number/ email address and tap "Next".
3. If you choose the mobile phone number option, then enter the verification code in the
message sent to you by SMS. Set a password as prompted and press "Confirm" to finish your
registration.
ADD DEVICE THROUGH NETWORK
1. Power conditioner on, when conditioner under standby mode, press the “FAN”button for 3
seconds to enter Wifi-connect mode.
2. Open Smart Home app and tap "+" in the upper right to add a new
device through the network.
3. Ensure the device 's indicator light rapidly flashes (2 times per second) and tap "Confirm
light is rapidly flashing".
To Next Page
Loading...
Need help?
General
