Qlima P 426 - Page 82

4
Join the two connectors B and C (see fig. 1) by pushing them firmly together
in the direction of the arrow (see fig. 2). Then screw connector B and C onto
the air hose.
5
Then screw connector A onto the air hose.
Fig. 3
6
Join the air hose with connector A (see fig. 1) to the air conditioner by sliding
it down through the guides A at the rear of the unit passed clasp B (see fig.
4).
Fig. 4
7
Pass the other end of the hose with connector B/C outside, for instance throu-
gh an open window (see fig. 5). Make sure that the hose is as straight as pos-
sible (see fig. 6).
Fig. 6
4
82
Fig. 5