25
4
D REMOTE SCREEN INDICATORS
Information are displayed when the remote controller is power up.
1. Fresh feature display (some units) (No display when Fresh function is activated).
Sleep mode display.
Follow me feature display.
Wireless control feature display.
Low battery detection display(If flashes).
2. Transmission Indicator - Lights up when remote sends signal to indoor unit.
3.
ON - TIMER ON display.
OFF - TIMER OFF display.
Silence feature display.
4. FAN SPEED display - Displays selected fan speed:
LOW -
MED -
HIGH -
AUTO
This fanspeed can not be adjusted in AUTO or DRY mode.
5. MODE display - Displays the current mode including: AUTO > COOL > DRY > HEAT > FAN.
6. ECO display (some units) - Displays when ECO feature is activated.
7. LOCK display - Displays when LOCK feature is activated.
8. Temperature/Timer/Fan speed display - Displays the set temperature by default, or fan speed or timer
setting when using TIMER ON/OFF functions.
• Timer setting range: 0-24 hours
This display is blank when operating in FAN mode.
G
NOTE!
All indicators shown in the figure are for the purpose of clear presentation. But during the actual
operation, only the relative function signs are shown on the display window.
Remote-man_RG10 EU ('21) V2.indd 25Remote-man_RG10 EU ('21) V2.indd 25 16-11-2021 17:1516-11-2021 17:15
• Temperature range: 16-30°C
To Next Page
Loading...
Need help?
General
