Qlima RG10 User Manual

26
E HOW TO USE BASIC FUNCTIONS
BASIC FUNCTIONS
ATTENTION! Before operation, please ensure the unit is plugged in and power is available.
SETTING TEMPERATURE
temperature in 1°C increments.
AUTO mode
In AUTO mode, the unit will automatically select
the COOL, FAN, or HEAT operation based on
the set temperature.
1. Press the MODE button to select AUTO.
2. Set your desired temperature using the TEMP ▲ or ▼ TEMP button.
3. Press the ON/OFF button to start the unit.
G
NOTE!
FAN SPEED can’t be set in AUTO mode.
COOL mode
1. Press the MODE button to select COOL mode.
2. Set your desired temperature using the TEMP ▲ or ▼ TEMP button.
3. Press FAN button to select the fan speed in range of AUTO, LOW, MED of HIGH.
4. Press the ON/OFF button to start the unit.
DRY Mode (dehumidifying)
1. Press the MODE button to select DRY.
2. Set your desired temperature using the TEMP ▲ or ▼ TEMP button.
3. Press the ON/OFF button to start the unit.
G
NOTE!
FAN SPEED cannot be changed in DRY mode.
4
Remote-man_RG10 EU ('21) V2.indd 26Remote-man_RG10 EU ('21) V2.indd 26 16-11-2021 17:1516-11-2021 17:15
The operating temperature range for units is 16-30°C /20-28 ºC. You can increase or decrease the set

Qlima RG10 Specifications

General

Brand	Qlima
Model	RG10
Category	Remote Control
Language	English