3–Installing Drivers
VMware Driver Software
30 BC0154503-00 C
VMware Driver Parameter Defaults
Table 3-5 lists the VMware driver parameter defaults.
Removing the VMware Driver
To remove the .vib file (qedentv), type the following command
#esxcli software vib remove --vibname qedentv
To remove the driver, type the following command:
#vmkload_mod -u qedentv
Table 3-5. VMware Driver Parameter Defaults
Parameter Default
Speed Auto-negotiation with speed advertised
Flow Control Auto-negotiation with Rx and Tx advertised
MTU 1,500 (range 46–9,600)
Rx Ring Size 8,192 (range 128–8,192)
Tx Ring Size 8,192 (range 128–8,192)
MSI-X Enabled
Transmit Send Offload (TSO) Enabled
Large Receive Offload (LRO) Enabled
RSS Enabled (four Rx queues)
HW VLAN Enabled
Number of Queues Enabled (eight Rx/Tx queue pairs)
Wake on LAN (WoL) Disabled
To Next Page
Loading...
