6–Configuring RoCE
Configuring RoCE on the Adapter for Linux
63 BC0154503-00 C
Client:
Configuring RoCE v1 or v2 Settings for RDMA_CM Applications
Use the following scripts from fastlinq-minor source package:
#./show_rdma_cm_roce_ver.sh
qedr0 is configured to IB/RoCE v1
qedr1 is configured to IB/RoCE v1
# ./config_rdma_cm_roce_ver.sh v2
configured rdma_cm for qedr0 to RoCE v2
configured rdma_cm for qedr1 to RoCE v2
Server:
To Next Page
Loading...
