7–iSCSI Extensions for RDMA
Configuring iSER for RHEL
72 BC0154503-00 C
c. Connect to or login to the iSER target by typing a command such as
the following:
iscsiadm -m node -l -p 192.168.100.99:3260 -T
iqn.2015-06.test.target1
d. Confirm that the Iface Transport is iser in the target connection, as
shown in the following figure. Type a command such as the following:
iscsiadm -m session -P2
e. Check for a new iSCSI device, as shown in the following figure. Type
command such as the following:
lsscsi
To Next Page
Loading...
