59096-04 A 1-1
Section 1
Introduction
This manual describes the features and installation of the SANbox® 5000 Series
Fibre Channel switch, firmware version 6.7. Table 1-1 describes the SANbox 5000
Series switch models and their distinguishing features.
This manual is organized as follows:
Section 1 describes the intended audience, related materials, safety notices,
communications statements, laser safety information, electrostatic discharge
sensitivity precautions, accessible parts, general program license, and
technical support.
Section 2 is an overview of the switch. It describes indicator LEDs and all
user controls and connections.
Section 3 describes the factors to consider when planning a fabric.
Section 4 explains how to install and configure the switch.
Section 5 describes the diagnostic methods and troubleshooting
procedures.
Section 6 describes the removal and replacement of field replaceable units.
This includes media transceivers for all models and power supplies for
switch models 5202 and 5602.
Appendix A lists the switch specifications.
Please read the communications statements and laser safety information later in
this section.
Table 1-1. SANbox 5000 Series Switch Models
Model 1-Gbps/2-Gbps 1/2/4-Gbps
Dual Replaceable
Power Supplies
5200 ✔
5202 ✔✔
5600 ✔
5602 ✔✔
To Next Page
Loading...
