14 – Command Reference
Set Config Port
59263-01 A 14-89
A
IOStreamGuard Enables or disables the suppression of RSCN messages.
IOStreamGuard can have the following values:
Enable – Suppresses the reception of RSCN messages
from other ports for which IOStreamGuard is enabled.
Disable – Allows free transmission and reception of
RSCN messages.
Auto – Suppresses the reception of RSCN messages
when the port is connected to an initiator device with a
QLogic HBA. For older QLogic HBAs, such as the
QLA2200, the DeviceScanEnabled parameter must also
be enabled. The default is Auto.
PDISCPingEnable
(SFP ports only)
Enables (True) or disables (False) the transmission of ping
messages from the switch to all devices on a loop port. The
default is True.
Table 14-19. Port Configuration Parameters (Continued)
Parameter Description
To Next Page
Loading...
