Qlogic SANbox 5802V

14 – Command Reference
Show Media
14-158 59263-01 A
S
The following is an example of the Show Media command for all ports:
SANbox #> show media
Note: -- LowAlarm; - LowWarning; + HighWarning; ++ HighAlarm
Port Vendor Name Temp Voltage Tx Bias Tx Pwr Rx Pwr
Num (C) (V) (mA) (mW) (mW)
---- ----------- ------- ------- ------- ------ ------
0 NotInstalled N/A N/A N/A N/A N/A
1 NotApplicable N/A N/A N/A N/A N/A
2 Unknown N/A N/A N/A N/A N/A
3 FINISAR N/A N/A N/A N/A N/A
4 FINISAR 37.32 3.33+ 7.30 0.371 0.000 --
5 FINISAR 37.32 3.33+ 7.30 0.371 0.000 --
6 FINISAR 37.32 3.33+ 7.30 0.371 0.000 --
7 FINISAR 37.32 3.33+ 7.30 0.371 0.000 --
8 FINISAR 37.32 3.33+ 7.30 0.371 0.000 --
9 FINISAR 37.32 3.33+ 7.30 0.371 0.000 --
10 FINISAR 37.32 3.33+ 7.30 0.371 0.000 --
11 FINISAR 37.32 3.33+ 7.30 0.371 0.000 --
12 FINISAR 37.32 3.33+ 7.30 0.371 0.000 --
13 FINISAR 37.32 3.33+ 7.30 0.371 0.000 --
14 FINISAR 37.32 3.33+ 7.30 0.371 0.000 --
15 FINISAR 37.32 3.33+ 7.30 0.371 0.000 --
16 FINISAR 37.32 3.33+ 7.30 0.371 0.000 --
17 FINISAR 37.32 3.33+ 7.30 0.371 0.000 --
18 FINISAR 37.32 3.33+ 7.30 0.371 0.000 --
19 FINISAR 37.32 3.33+ 7.30 0.371 0.000 --
20 Unknown N/A N/A N/A N/A N/A
21 INFINEON N/A N/A N/A N/A N/A
22 INFINEON 39.62 N/A 5.84 0.637 0.092
23 INFINEON 39.62 N/A 5.84 0.637 0.092