14 – Command Reference
Show Port
14-168 59263-01 A
S
LIP_F8_AL_PS This LIP denotes a loop failure detected by the L_Port identi-
fied by AL_PS.
LIP_F7_F7 A loop initialization primitive frame used to acquire a valid
AL_PA.
LIP_F8_F7 A loop initialization primitive frame used to indicate that a loop
failure has been detected at the receiver.
Login Number of device logins
LoginStatus Device login status for the port: LoggedIn or NotLoggedIn
Logout Number of device logouts that have occurred on the port
LongFramesIn Number of incidents when one or more frames that are greater
than the maximum size were received
LoopTimeouts A two (2) second timeout, as specified by FC-AL-2.
LossOfSync Number of synchronization losses (>100 ms) detected by this
port. A loss of synchronization is detected by the receipt of an
invalid transmission word.
LostFrames Number of incidents of lost frames.
LostRRDYs Number of incidents of lost Receiver_Ready (R_RDY) primi-
tives
MaxCredit Maximum number of port buffer credits
MediaSpeeds Possible transmission speeds for the port
MediaPartNumber Transceiver vendor part number
MediaRevision Transceiver revision
MediaType Media physical variant. The variant indicates speed, media,
transmitter, and distance. The media designator may be M5
(multimode 50 micron), M6 (multimode 62.5 micron), or MX.
MX indicates that the media supports both multimode 50 and
62.5 micron.
MediaVendor Transceiver manufacturer
MediaVendorID Transceiver manufacturer identifier
OperationalState Operational state
PerfTuningMode AutoPerfTuning status
PortID Fibre Channel port address
Table 14-40. Show Port Parameters (Continued)
Entry Description
To Next Page
Loading...
Need help?
General
