14 – Command Reference
Show Setup System
14-178 59263-01 A
S
Examples The following is an example of the Show Setup System Dns command:
SANbox #> show setup system dns
System Information
------------------
DNSClientEnabled False
DNSLocalHostname <undefined>
DNSServerDiscovery Static
DNSServer1Address <undefined>
DNSServer2Address <undefined>
DNSServer3Address <undefined>
DNSSearchListDiscovery Static
DNSSearchList1 <undefined>
DNSSearchList2 <undefined>
DNSSearchList3 <undefined>
DNSSearchList4 <undefined>
DNSSearchList5 <undefined>
The following is an example of the Show Setup System Ipv4 command:
SANbox #> show setup system ipv4
System Information
------------------
EthIPv4NetworkEnable True
EthIPv4NetworkDiscovery Static
EthIPv4NetworkAddress 10.20.11.32
EthIPv4NetworkMask 255.255.252.0
EthIPv4GatewayAddress 10.20.8.254
The following is an example of the Show Setup System Ipv6 command:
SANbox #> show setup system ipv6
System Information
------------------
EthIPv6NetworkEnable False
EthIPv6NetworkDiscovery Static
EthIPv6NetworkAddress 2001::1/64
EthIPv6GatewayAddress fe80::1
The following example of the Show Setup System Logging command:
SANbox #> show setup system logging
System Information
------------------
LocalLogEnabled True
RemoteLogEnabled False
RemoteLogHostAddress 10.0.0.254
To Next Page
Loading...
Need help?
General
