QNAP TS-1273U User Manual

Component TS-873U
TS-873U-RP
TS-1273U
TS-1273U-RP
TS-1673U
TS-1673U-RP
Processor
CPU AMD R-Series RX-421ND quad-core 2.1 GHz processor, Turbo Core up to 3.4 GHz
Architecture 64-bit
Encryption engine AES-NI
Memory
Pre-installed memory • 8 GB RAM: 2 x 4 GB UDIMM DDR4
• 16 GB RAM: 2 x 8 GB UDIMM DDR4
• 64 GB RAM: 4 x 16 GB UDIMM DDR4
Use only non-error-correcting code (ECC) QNAP memory modules to maintain
system performance and stability. For NAS devices with more than one memory slot,
use non-ECC QNAP modules with identical specifications.
Note
Using unsupported modules may degrade performance, cause
errors, or prevent the operating system from starting.
Total memory slots 4 x UDIMM DDR 4
Maximum memory 64 GB (4 x 16 GB)
Storage
Drive bays 8 x SATA 6Gb/s 12 x SATA 6Gb/s 16 x SATA 6Gb/s
Drive compatibility • 3.5-inch SATA hard disk drives
• 2.5-inch SATA hard disk drives
• 2.5-inch SATA solid state drives
M.2 SSD type 2 x M.2 SSD SATA 6 Gbps
M.2 SSD form factor • 2260
• 2280
SSD cache
acceleration support
• Drive bays 1 to 8
• M.2 slots 1 to 2
• Optional: SSD using
PCIe expansion slot
• Drive bays 1 to 12
• M.2 slots 1 to 2
• Optional: SSD using
PCIe expansion slot
• Drive bays 1 to 16
• M.2 slots 1 to 2
• Optional: SSD using
PCIe expansion slot
Hot-swappable Yes
Note
The following are not hot-swappable:
• M.2 SSDs
• SSD cache drives
• SSDs using PCIe expansion slots
Network
10 gigabit Ethernet
ports
2 x SFP+
TS-x73U User Guide
Product Overview 5

QNAP TS-1273U Specifications

General

Brand	QNAP
Model	TS-1273U
Category	Storage
Language	English