Need help?Do you have a question about the QNAP TS-419P II and is the answer not in the manual?
General| RAID levels | 0, 1, 5, 6, 10, JBOD |
|---|---|
| RAID support | - |
| Storage drive size | 2.5/3.5 \ |
| Storage drive capacity | 0 GB |
| Supported file systems | ext3, ext4, FAT32, HFS+, NTFS |
| Storage drive interface | Serial ATA II |
| Total installed storage capacity | 0 TB |
| Number of storage drives installed | 0 |
| Number of storage drives supported | 4 |
| Flash memory | 16 MB |
| Internal memory | 0.5 GB |
| Internal memory type | DDR3 |
| Processor family | Marvell |
| Processor frequency | 2 GHz |
| Number of processors installed | 1 |
| Fan | 9cm |
| Dimensions (WxDxH) | 180 x 235 x 177 mm |
| Power requirements | 100 - 240 V |
| Networking features | Gigabit Ethernet |
| Wi-Fi | No |
| DHCP client | Yes |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Supported network protocols | CIFS/SMB, AFP (3.2), NFS (v3), FTP, HTTP, HTTPS, Telnet, SSH, iSCSI, SNMP |
| Noise level | 36.7 dB |
| Number of users | 4096 user(s) |
| Security algorithms | 128-bit AES, 256-bit AES, SSH, SSL/TLS |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN (RJ-45) ports | 2 |
| Operating system installed | Linux |
| Chassis type | Tower |
| Product color | Black |
| LED indicators | HDD, LAN, USB |
| Number of fans | 1 fan(s) |
| Power consumption (sleep) | 13 W |
| Power consumption (typical) | 26 W |
| Power supply unit (PSU) capacity | 96 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
Weight and Dimensions| Weight | 3000 g |
|---|---|
| Package weight | 4600 g |
Legal disclaimer and explanations of warning/caution symbols used in the manual.
FCC and CE compliance statements for the device.
Essential safety guidelines for operating the NAS to prevent hazards.
Detailed specifications for CPU and memory across various Turbo NAS models.
Describes the behavior and usage of the power and reset buttons.
Explains the meaning of LED status lights and beep alarms on the NAS.
How to use the one-touch USB copy feature for data backup.
Step-by-step instructions for upgrading the NAS memory modules.
Guide for installing network expansion cards to enhance connectivity.
Information on hard drive compatibility and hot-swapping procedures.
How to recover RAID volumes and supported configurations.
Using the LCD panel for disk configuration and system monitoring.
Explanations of system messages displayed on the LCD panel.
Instructions for installing and replacing power supply units.
Enabling and managing redundant power supply modes and alerts.
Contact details for QNAP technical support and customer service.
To Next Page
