QNAP TS-412 - User Manual

QNAP Turbo NAS
Hardware User Manual
©Copyright 2011. QNAP Systems, Inc. All Rights Reserved.

QNAP TS-412 Specifications

General

RAID levels	0, 1, 5, 6, 10
Storage drive size	2.5/3.5 \
Storage drive capacity	- GB
Supported file systems	ext3, ext4, FAT32, HFS+, NTFS
Storage drive interface	Serial ATA, Serial ATA II
Total installed storage capacity	- TB
Maximum supported storage capacity	8 TB
Number of storage drives installed	-
Number of storage drives supported	4
Flash memory	16 MB
Internal memory	0.25 GB
Internal memory type	DDR2
Processor model	6281
Processor family	Marvell
Processor frequency	1.2 GHz
Number of processors installed	1
Fan	90 mm
Dimensions (WxDxH)	180 x 235 x 177 mm
Power requirements	100-240V
Networking features	Gigabit Ethernet
Compatible operating systems	Windows 2000; Windows XP; Windows Vista (32/ 64 bit); Windows Windows 7 (32/ 64 bit); Windows Server 2003/2008; Mac OS X; Linux & Unix.
DHCP client	Yes
Maximum data transfer rate	1000 Mbit/s
Supported network protocols	TCP/IP
Security algorithms	HTTPS, SSH, SSL/TLS
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	2
Chassis type	Tower
LED indicators	HDD, LAN, Power, Y
Number of fans	1 fan(s)
Power consumption (sleep)	11 W
Power consumption (typical)	26 W
Power supply unit (PSU) capacity	120 W
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	3000 g

Summary

Safety Warnings

CPU and Memory Specifications

Power Button and Reset Button Behavior

USB One Touch Copy

LED and Alarm Buzzer Specifications

Upgrade Memory on QNAP Turbo NAS (RAM Module Installation)

TS-x59 Pro II Series (4;5;6-bay)

Instructions for installing RAM on specific TS-x59 Pro II models.

TS-879 U-RP, TS-1279 U-RP, TS-EC879 U-RP, TS-EC1279 U-RP

Instructions for installing RAM on specific TS-879U/1279U/EC models.

Network Expansion Card Installation

TS-879 Pro, TS-1079 Pro

Instructions for installing network cards on TS-879/1079 Pro models.

TS-879 U-RP, TS-1279 U-RP

Instructions for installing network cards on TS-879U/1279U-RP models.

Hot-swap Hard Drives

RAID Recovery

Use the LCD Panel

Install Power Supply Unit

1 U Turbo NAS

Steps to install a redundant power supply unit on 1U models.

2 U Turbo NAS (TS-1279 U-RP and TS-EC1279 U-RP only)

Steps to replace a power supply unit on specific 2U models.

2 U Turbo NAS (except TS-1279 U-RP and TS-EC1279 U-RP)

Steps to replace a power supply unit on other 2U models.

Technical Support