2. Product Overview
This chapter provides basic information about the QNAP TVS-x72XU NAS.
About the TVS-x72XU
Powered by an Intel
®
Core™ i3-8100 processor, the TVS-x72XU is an enterprise-class series NAS. The
series supports different disk storage configurations to better meet your virtualization and data storage
needs. It also features four Long-DIMM memory slots, scaling up to 64GB of memory, several expansion
card slots, and various input/output (I/O) ports for better scalability and flexbility.
Hardware Specifications
Warning
If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third-party
invalidates the warranty.
QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
For details, see the QNAP Warranty Terms and Conditions.
Ordering P/N CPU Memory Power supply
TVS-1672XU-RP-I3-8G
Intel
®
Core™ i3-8100
8 GB Redundant
TVS-2472XU-RP-I5-8G
Intel
®
Core™ i5-8500
8 GB Redundant
Component TVS-1672XU-RP TVS-2472XU-RP
Processor
CPU Intel® Core™ i3-8100 Intel® Core™ i5-8500
Frequency 4-core 3.6 GHz 6-core 3.0 GHz
Architecture x86 64-bit
Encryption engine AES-256
Memory
Pre-installed memory 8 GB RAM: 2 x 4 GB DDR4
Memory slots 4 x Long-DIMM DDR4
Important
Use only QNAP memory modules to maintain system
performance and stability. For NAS devices with more
than one memory slot, use QNAP modules with
identical specifications.
Using unsupported modules may degrade
performance, cause errors, or prevent the operating
system from starting.
Maximum memory 64 GB RAM: 4 x 16 GB
Flash memory 4 GB (dual boot OS protection)
Storage
Drive bays 16 x 3.5-inch SATA 6 Gbps bays 24 x 3.5-inch SATA 6 Gbps bays
TVS-x72XU User Guide
Product Overview 4
To Next Page
Loading...
Need help?
General
