To Next Page
K
Kelly LoveAug 9, 2025
What to do if hot-swapping failed drives on QNAP Storage?
- RRyan ReidAug 9, 2025
If one or two member drives fail, log on to QuTS hero, then go to Main Menu > Storage & Snapshots > Storage > Disks/VJBOD. Locate the failed drive, and prepare a new hard drive. Ensure the new drive has a capacity that is the same as or larger than the failed hard drive. Remove the failed drive from the device, wait for approximately 20 seconds (or until the device beeps twice), remove the failed drive from the drive tray, insert the new drive into the drive tray, and then install the new drive.
General
