Category Item
Hardware and peripherals • Storage drives
For the list of compatible drive models, go to https://
www.qnap.com/compatibility.
• Network cable
Tools • Phillips #1 or #2 screwdriver
• Anti-static wrist strap
Setting Up the NAS
Important
Read all safety requirements and information carefully before setting up the NAS or installing
NAS components.
1. Place your NAS device in an environment that meets the requirements.
For details, see Installation Requirements.
2. Install drives.
For details, see the following topics:
• Installing 3.5-inch Hard Drives on 3.5-inch Trays
• Installing 2.5-inch Hard Drives or Solid-State Drives on 3.5-inch Trays
• Installing M.2 Solid-State Drives
3. Optional: Replace or install additional memory modules.
For details, see Replacing Memory Modules.
4. Optional: Install expansion cards.
For details, see the following topics:
• Installing Expansion Cards on the TVS-h474
• Installing Expansion Cards on the TVS-h674 and TVS-h874
5. Optional: Connect expansion units.
For details, see the following topics:
• Connecting SATA JBOD Expansion Units
• Connecting USB Expansion Units
6. Connect the power cord and all applicable cables.
7. Power on the NAS.
8. Install QuTS hero.
For details, see QuTS hero Installation.
9. Log on to QuTS hero.
TVS-hx74 User Guide
Product Overview 13
To Next Page
Loading...
Need help?
General
