Component TVS-1672XU-RP TVS-2472XU-RP
Rail compatibility RAIL-A03-57 RAIL-A02-90
Note
• Rail kits are not included with the NAS and must
be purchased separately. For details, contact an
authorized reseller or go to http://shop.qnap.com.
• Information on rail kit installation can be found in
the installation guide included in the rail kit
package.
Power supply unit 2 x 500W, 100-240V AC, 50/60Hz 2 x 800W, 100-240V AC, 50/60Hz
System battery CR2032 lithium battery (3V, 225 mAh)
Warning
To avoid potential battery explosion, causing injury or
damage to components, ensure that you replace the
existing battery with a battery of the same type.
Important
Dispose of used batteries according to local
regulations or the instructions of the battery
manufacturer.
Sound level 49.7 db(A) 36.3 db(A)
Note
The sound level was tested at a bystander position,
which is within one meter of the NAS. The test NAS
operated at low speed with the maximum number of
drives installed.
Fans System: 4 x 92 mm, 12V DC
Warning
To avoid potential injury or damage to components, do
not touch the fans while the NAS is connected to a
power source.
Operating temperature 0˚C to 40˚C (32˚F to 104˚F)
Relative humidity • Non-condensing relative humidity: 5% to 95%
• Wet-bulb temperature: 27˚C (80.6˚F)
Tip
Model specifications are subject to change without prior notice. To see the latest
specifications, go to https://www.qnap.com.
Package Contents
Item Quantity
TVS-x72XU NAS 1
Power cord • TVS-1672XU-RP: 2
• TVS-2472XU-RP: 2
TVS-x72XU User Guide
Product Overview 6
To Next Page
Loading...
Need help?
General
