How to reboot QOLSYS Touchscreen panel?
If your QOLSYS Touchscreen panel is acting up, you can often fix it by restarting the system. Just go to 'Settings', enter the installer code, then select 'Panel Reboot', and wait for the panel to restart.
What to do if my QOLSYS Touchscreen is frozen?
If your QOLSYS Touchscreen panel is frozen or having serious issues, you can force it to restart. Press and hold the 'Home' button for 30 seconds to reset the software.
How to manually update QOLSYS Touchscreen software via Wi-Fi?
To manually update your QOLSYS Touchscreen software using Wi-Fi, first, ensure you're connected to a Wi-Fi network. Then, tap 'Settings' and enter your installer code. Next, tap 'Installation', then 'Upgrade Software'. Tap 'Patch Tag', enter the code for the new software, and finally, tap 'Upgrade using Network' and follow the on-screen instructions.
How to update QOLSYS Touchscreen software via SD card?
To update your QOLSYS Touchscreen software using an SD card: 1. Get an SD card with at least 1GB of free space. 2. Log in to Dealers.Qolsys.com and find the software update on the 'Downloads' page. 3. Save the file to your SD card. 4. Insert the SD card into the slot on the back left of the panel. 5. Touch 'Settings' and enter your installer code. 6. Touch 'Installation'. 7. Touch 'Upgrade Software'. 8. Touch 'Upgrade via SD Card' and follow the prompts.
What to do when moving the QOLSYS Touchscreen panel?
When moving your QOLSYS Touchscreen panel, make sure the battery has enough charge to keep it running while it’s unplugged from A/C power. If the battery is low, shut down the panel’s operating system before disconnecting it from the power supply. You can do this by going to 'Settings', entering the installer code, and selecting 'Shut down'.
How to do a software update using Wi-Fi on QOLSYS Touchscreen?
To update your QOLSYS Touchscreen software using Wi-Fi: 1. Make sure your panel is connected to Wi-Fi. 2. Go to 'Settings' (enter your installer code, which is 1111 by default). 3. Touch 'Installation'. 4. Touch 'Upgrade Software'. 5. Touch 'Upgrade Using Network'. The IQ Panel will then check for the latest software. If it's already up to date, a confirmation message will appear. If an update is available, the panel will download it automatically. Once the download is complete, you'll be prompted to restart the panel to install the software. Touch 'okay,' and your panel will install the update and restart automatically.
How to power down QOLSYS Touchscreen?
To safely power down your QOLSYS Touchscreen: 1. Select 'Settings' from the home screen. 2. Enter the installer or master code. 3. Select 'Power Down'. Important: Failure to perform these steps in the proper sequence may result in data corruption and/or panel failure. If you need to move the panel, it is safe to unplug the power supply while leaving the battery plugged in.
What to do if QOLSYS Touchscreen hard reboot?
If your QOLSYS Touchscreen panel is frozen or experiencing serious issues that you can't resolve, you can force a reset by pressing and holding the 'Home' button for 30 seconds. Important: This should only be used when absolutely necessary, as it may result in data corruption or panel failure.
How to set up automatic software updates on QOLSYS Touchscreen?
To enable automatic software updates on your QOLSYS Touchscreen: 1. Touch 'Settings'. 2. Enter the Installer code (default is 1111). 3. Touch 'Installation'. 4. Touch 'Upgrade Software'. Make sure the 'Automatic Updates' button is checked. You can also change the update interval by selecting 'Automatic Upgrade Interval'.
How to reboot QOLSYS IQ PANEL Control Panel?
To reboot your QOLSYS Control Panel, follow these steps: 1. From the home screen, select “Settings”. 2. Enter the installer or master code. 3. Select “Panel Reboot”. 4. Wait for the panel to restart.
General| Display | 7-inch touchscreen |
|---|---|
| Resolution | 1024 x 600 |
| Communication | Wi-Fi, Cellular |
| Sensors | Built-in Accelerometer |
| Voice Control | Yes (Amazon Alexa, Google Assistant) |
| Z-Wave | Yes (Z-Wave Plus) |
| Bluetooth | Yes |
| Battery Backup | Rechargeable lithium-ion battery |
| Siren | 85dB internal siren |
| Wireless Connectivity | Wi-Fi, Z-Wave, Bluetooth |
| Security | Encrypted Sensors, Tamper Detection |
To Next Page
