Need help?Do you have a question about the QSC GX5 and is the answer not in the manual?
General| Amplifier class | H |
|---|---|
| Input sensitivity | 1200 mV |
| Audio output channels | - channels |
| Peak power per channel | 850 W |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.01 % |
| RMS power output per channel (8 Ohm) | 500 W |
| DC-in jack | Yes |
| Speakers connectivity type | XLR / 1/4\ |
| Purpose | Home |
| Product color | Black |
| Connectivity technology | Wired |
| Sustainability certificates | RoHS |
| Maximum current | 6 A |
| Certification | UL, CE |
| Package weight | 14600 g |
Weight and Dimensions| Depth | 257 mm |
|---|---|
| Width | 483 mm |
| Height | 89 mm |
| Weight | 12600 g |
Follow all safety instructions and warnings for proper operation and maintenance of the amplifier.
Explanation of the exclamation point and lightning flash symbols indicating hazards.
Details on FCC compliance and measures to correct radio frequency interference.
Highlights amplifier capabilities like power matching, inputs, lightweight design, and protection.
Table detailing output power for GX3, GX5, and GX7 models at different impedances.
Details on the amplifier's front panel components like the power switch and cooling vents.
Physical dimensions of the amplifier in inches and centimeters, including rack mounting height.
Explanation of gain controls, signal, clip, and power LEDs on the front panel.
Guidelines for rack mounting, including RU size and screw types.
Details on the rear panel crossover switch and its positions for signal routing.
Description of available input connectors: XLR, TRS, TS, and Phono, including pinouts.
Information on rear ear mounting for rack support and exhaust vent clearance.
Details of pin configurations for Speakon, 1/4-inch, and binding post speaker outputs.
Instructions on connecting speakers using binding posts, 1/4-inch connectors, and Speakon cables.
Procedure for resetting the AC breaker after a power interruption.
Information on locating and recording the amplifier's serial number and ratings.
Diagrams showing how to connect various signal sources like XLR, 1/4, and Phono.
Diagrams illustrating speaker connections using Speakon, 1/4, wire, and banana jacks.
Guidelines on connecting multiple speakers per channel, including impedance considerations.
Configuration for connecting a subwoofer and a top box using crossover mode.
Wiring for powering main speakers and monitor speakers.
Setting up stereo playback using individual channels for left and right signals.
Connecting a single source to both channels for independent gain control per speaker.
Diagnosing and resolving issues related to power, fans, and volume loss.
Troubleshooting audio signal problems, distortion, hum, and no sound scenarios.
Identifying conditions requiring professional service and safety precautions.
Detailed specifications including output power, sensitivity, distortion, frequency response, and impedance.
Table showing AC power consumption and BTU/hr for various operating conditions.
Information on the 3-year limited warranty, terms, and conditions.
Mailing address, telephone numbers, facsimile numbers, and website for QSC support.
To Next Page
