QSC K.2 series Firmware Update

QSC K.2 Firmware V1.1.0.3101 Update Process 10-31-2018
9
QSC © 2018
K.2 Firmware Update
1 Open K2Updater.exe
1. Remove Rotor Knob from Amp Module to expose Micro USB connector.
2. Plug USB cable to computer and K.2 Amp Module
3. Power ON K.2 Amp Module Unit Serial # should now appear in K.2 Updater
WARNING: To avoid corruption during the firmware update process:
 Do Not Power OFF the Amp module.
 Do Not unplug the USB Cable.
 Make sure the computer is connected to a Power Source.

QSC K.2 series Specifications

General

Brand	QSC
Model	K.2 series
Category	Speakers
Language	English