K.2 APPLICATION GUIDE— Solo/Duo Musicians 5
SOLO PERFORMER
BUSKING / COCKTAIL PARTY GIG
A solo singer/instrumentalist can make use of the mixer built into each K.2 loudspeaker. For a small gig busking or playing
a cocktail party this performer uses a single K8.2, plugging the vocal mic into Input A and the acoustic guitar’s piezo pickup
system into Input B, plus another K8.2 as an optional small wedge monitor. If AC mains power is unavailable, the very low
current draw of the loudspeaker makes it possible to run for a few hours from a suitable battery and inverter system.
The Acoustic Guitar / Vox preset is optimized for using a vocal mic on Input A and an acoustic guitar with a piezo pickup on
Input B.
TECH REQUIREMENTS:
One vocal mic
One acoustic guitar (direct in)
Mains:
One K8.2 loudspeaker [preset Acoustic Guitar / Vox; no sub]
Monitor (optional):
One K8.2 loudspeaker [preset Stage Monitor 1]
Preset: ACOUSTIC GUITAR / VOX
K8.2
In A: LINE
Preset: STAGE MONITOR 1
K8.2
vocal mic
A IN—MIC
acoustic guitar
B IN—INST
MIX OUT
A IN—LINE
To Next Page
Loading...
