4
TD-000335-00-C
Other KLA Series Deployment Options
In addition to the M10 rigging listed above, you can use a KLA AF12 array frame to suspend an array (Figure 6), you can pole-mount up to two
KLA12s over a KLA181 (Figure 7).
Making Connections
WARNING!:
Do not connect more than fi ve KLA Series loudspeakers together using the loop-thru power cables (four loop-thru
cables, one AC power cord). Make all loop-thru connections prior to connecting to the AC mains.
CAUTION!:
Do not restrict airfl ow to the rear of the speaker enclosure. Do not expose the rear panels exposed to a heat source such
as direct sunlight.
— Figure 6 —
— Figure 7 —
Max pole length
36 inches
(914 mm)
— Figure 8 —
M
A
X
I
M
U
M
F
I
V
E
L
O
U
D
S
P
E
A
K
E
R
S
AC Mains
Audio Source
To Next Page
Loading...
