Do you have a question about the QSC PLD Series and is the answer not in the manual?
Channels | 4 |
---|---|
Amplifier Class | Class D |
Power Requirements | 100-240 VAC, 50-60 Hz |
Frequency Response | 20 Hz - 20 kHz |
Total Harmonic Distortion | < 0.05% |
Input Connectors | XLR |
Output Connectors | Speakon NL4 |
DSP | Yes |
Software | Q-SYS Designer |
Input Impedance | 20k ohms balanced |
Cooling | Variable-speed fan |
Protection | Thermal, over-current, short-circuit |
Dimensions | 483 mm |
Damping Factor | >500 |