PLD Series Amplifiers 15
Application Guide—Portable PA Rev. E, Apr. 2015
Amplifier Navigator™
QSC’s exclusive Amplifier Navigator™ software is a versatile utility for
configuring, and managing PLD Series amplifiers. It connects to
the amplifier via a USB cable (included with the amplifier); and
with a USB hub, a single computer can connect to multiple
(as many as 20) amplifiers at the same time.
Amplifier Navigator offers a complete selection of operations:
• Amp firmware check and update
• Input configuration
• Output configuration (including preset selection, editing,
and saving)
• Selecting and editing loudspeaker profiles
• Copying and transferring configurations among amps
• Logging of AC mains, heat sink temperatures, run time,
load impedances, etc.
• Diagnosis
Amplifier Navigator is available for both Mac and the Windows operating system and is downloadable for free from the
QSC web site.
Amp firmware check and updating.
Logging of amp parameters. Configuring amp channel filtering, EQ, delay, limiting, etc.
To Next Page
Loading...
