QSC PLX Series User Manual

PLX Product Specifications
PLX 1202
PLX 1602
PLX 2402
PLX 3002
PLXI 202
PLXI 602
PLX2402
PLX3002
Output Power (per channel):
Continuous Average
Output Power both channels driven:
8 ohms,
2OHz - 2OkHz, 0.03% THD 200watts
4 ohms, 2OHz - 2OkHz, 0.05% THD
325 watts
Con0nuous Average Output Power bridged mono ooeration:
300 waKs
425watts 550
watts
500 watts
700 watts 900watts
8 ohms,
2OHz - 2OkHz, 0.1% THD
Voltage Gain (dB)
Sensitivity (for rated power @ 8 ohms)
Distortion
Frequency Response (LF Switched Off)
Damping Factor (1 kHz and Below)
Noise
Input Impedance
Dimensions
Faceplate Width
Faceplate Height
Chassis Depth
Weight
Net, Lbs/kg
700 iatts 1100 watts 1500 watts
32 32
32
1.00vrms 1.20 Vrms
1.50 Vrms
SMPTE-IM Less than 0.01%
2OHz to 2OkHz, +I-0.2dB
8Hz to 5OkHz, +Ol-3dB
Greater than 500
106dB below rated output (20 Hz to 20 kHz)
6k unbalanced,
12k balanced
2000 watts
32
1.70 vrms
Standard 19” Rack Mounting
3.Y 3.r
13.2Y 13.2v
2119.5 2119.5
3.5” 3.Y
13.2Y 13.2Y
2119.5
2119.5

QSC PLX Series Specifications

General

Channels	2
Series	PLX
Frequency Response	20Hz - 20kHz
Total Harmonic Distortion	<0.02%
Signal to Noise Ratio	>105 dB
Input Impedance	20k ohms balanced, 10k ohms unbalanced
Cooling	Variable speed fan
Connectors	Input: XLR; Output: Binding posts, Speakon
Height	3.5" (2U)
Weight	28 lbs (12.7 kg)