TouchMix Self-Guided Tour 5
• You can select the Channel Compressor
(Comp) and Gate by touching their respective
tabs at the top of the screen (Image 1.10).
Touching RTA On displays the channel’s Real
Time Analyzer.
• Once at Comp (Image 1.11) or Gate you
can touch and adjust parameters with the
Master-Encoder just like the Channel
Faders and EQ.
TouchMix also gives you assignable Phantom
Power on all your inputs.
• To assign Phantom Power to an input—Press
the Phantom “+48V” button (Image 1.12).
• From this screen you can supply
Phantom Power to any and all of your XLR
Input Channels simply by touching the
channels on the screen.
1. NAVIGATION (Cont’d)
Image 1.10
Image 1.11
Image 1.12
To Next Page
Loading...
