TouchMix Self-Guided Tour 6
When Phantom Power is assigned to a channel,
that channel will appear RED, with a “+48V”
indication on the input icon (Image 1.13).
• To remove Phantom Power on a channel just
touch it again and the Phantom Power
designation will be removed (Image 1.14).
1. NAVIGATION (Cont’d)
Image 1.13
Image 1.14
Image 1.15
Image 1.16
Now that you’ve got the basic control of the mixer
down, let’s dive a little deeper and explore the output
processing of the mixer.
• Push the “Home” button and select “Aux Masters”
(Image 1.15). The mixer will display all the Aux Mas-
ter faders and the Main L/R fader.
• Open an Aux or Main Channel Strip by touching the
channel name above the fader (Image 1.16).
Here you will nd the Overview, PEQ, GEQ, Anti-
Feedback and Limiter for the Input you have selected.
Many of these functions a similar to their counterparts
on the input channels. So let’s explore the ones that
dier.
To Next Page
Loading...
