Do you have a question about the QUAD 405 and is the answer not in the manual?
Power Output | 100W per channel into 8Ω |
---|---|
Frequency Response | 20Hz to 20kHz (+0dB, -0.5dB) |
Total Harmonic Distortion | 0.01% |
Input Sensitivity | 0.5V RMS |
Damping Factor | 50 |
Dimensions | 115mm x 340mm x 195mm (H x W x D) |
Signal to Noise Ratio | 95 dB |
Input Impedance | 20k Ohms |
Type | Solid State Amplifier |