Need help?Do you have a question about the QUAD 405-2 and is the answer not in the manual?
General| Power Output | 100W per channel into 8Ω |
|---|---|
| Weight | 8.5 kg |
| Input Sensitivity | 0.5V RMS |
| Input Impedance | 20kΩ |
| Dimensions | 115mm x 340mm x 195mm (H x W x D) |
| Frequency Response | 20Hz to 20kHz ±0.5dB |
| Signal-to-Noise Ratio | Better than 95dB (unweighted) |
Details connecting the amplifier to the AC mains supply, including voltage selection.
Explains proper grounding methods via signal or AC mains leads.
Describes the main and internal fuses, their types, ratings, and replacement procedure.
Instructions for connecting loudspeakers, including phasing and impedance.
Information on protecting loudspeakers from amplifier output levels.
Details the amplifier's power output capabilities into various loads and frequencies.
Details the amplifier's electrical protection mechanisms against faults.
To Next Page
