Customer Helpline 0344 801 0979
11
ORIGINAL INSTRUCTIONS
- When switching on the motor;
- Take care against injury from any device tted for trimming the lament line length. After extend-
ing new cutter line always return the machine to its normal operating position before switching on;
- Never t metal cutting elements;
- Never use replacement parts or accessories not provided or recommended by the manufacturer;
- Disconnect the machine from the mains before checking, cleaning or working on the machine and
when it is not in use;
- Always ensure that ventilation openings are kept clear of debris;
After use, disconnect the machine from the mains and check for damage;
When not in use store the machine out of the reach of children;
Mains powered trimmers should only be repaired by an authorised repairer;
Use only manufacturers recommended replacement parts and accessories;
- Read the instructions carefully;
- Be familiar with the controls and proper use of the equipment;
- Before use check the supply and extension cord for signs of damage or ageing;
- If the cord becomes damaged during use, disconnect the cord from the supply immediately. DO
NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY;
Do not use the lawn trimmer (edge trimmer), if the cords are damaged or worn.
Maintenance and Storage Safety
Operational Safety (continued)
Safety Information
Important - Please read these instructions fully before starting assembly
To Next Page
Loading...
Need help?
General
