Qualcast Qhte600 - In The Box; Product Components; Assemble The Hedge Trimmer; Blade Sheath Attachment

14 15
In The Box
Parts
A. Blade sheath
B. Blade
C. Guard
D. Front handle
E. Rear handle
F. Cable strain relief
G. Cable and plug
H. Unlock button
I. On/off switch
J. Safety switch
A
B
C
D
E
F
G
I
H
J
Assemble The Hedge Trimmer
WARNING!
Always take care when removing the packaging, to prevent damage to you or to
the hedge trimmer.
Make sure that you have sufcient space to put the hedge trimmer down. Keep
your feet apart so that you have a stable position; bend at the knees and keep
your back straight.
Always recycle the packaging in accordance with local recycling schemes.
Blade sheath
1. Remove the blade sheath (A) from the cutting blades (B) before operation.
2. After use, align the blade sheath (A) to the cutting blades (B) and push it onto it to
attach. Ensure the sheath engages properly, check by pulling. It should not be possible
to simply pull off the sheath.
B
A
Handle adjustment
Adjust the handle to t the application.
1. Press the unlock button (H) at both sides.
H
H