QualGear QG-TM-090-BLK User Manual (English)

To Next Page

Using an assistant, hang

the TV onto the wall plate

carefully by pushing the

buttom of the TV towards

the wall until the latches fit into the

wall plate rail. Then hide the two

safety straps at the back of the TV to

avoid pulling on it accidently, which

may cause the TV to release and fall.

PUSH

PULL DOWN TO RELEASE

WALL WALL

Make sure the TV is safely

secured on the wall before releasing it.

Do not pull on the safety straps unless

you need to remove the TV. See

step 4 on how to safely remove the TV.

To remove the TV from the Wall Plate,

have an assistant hold the TV

while the other person pull the two

safety straps downward at the

same time to unlock the latches from

the wall plate rail. Then carefully lift

and remove the TV.

QG-TM-090-BLK

Removing the TV from the Wall Plate

60 100

100

200x200 300x300 400x200 400x400

600x400 800x400 800x600 900x600

Version September 2018Version September 2018

HEAVY DUTY FIXED TV WALL MOUNT

Do not exceed the maximum rated weight

specified. Otherwise, serious injury or

property damage may occur.

100kg100kg

(220lbs)

RATEDRATED

Scan the QR Code™ below

for more info about this product:

Need help?

Do you have a question about the QualGear QG-TM-090-BLK and is the answer not in the manual?

QualGear QG-TM-090-BLK Specifications

General

Brand	QualGear
Model	QG-TM-090-BLK
Product Type	TV Mount
Color	Black
Mount Type	Full Motion
Tilt Range	+5° to -15°
Material	Steel
Installation Hardware Included	Yes
Cable Management	Yes
VESA Compatibility	200x200 to 600x400
Swivel Range	+90° to -90°
Wall Stud Spacing	16 or 24 inches