Maintenance
11
Hanging the TV onto the Wall Plate
3
Please check that the wall mount is secure and safe to use at regular intervals. If you have any
questions regarding any of the instructions or warnings, please contact your local distributor (OR)
contact QualGear technical support via email at support@qualgear.com.
QG-TM-T-015
www.qualgear.com
For Most 32" to 55" Flat Screen TVs
and Monitors
55"
MAX
CAUTION!
VESA
200x200 | 300x300 | 400x200 | 400x400
Pull
Wall
Wall
Prior to hanging the display on
the wall plate, first loosen the
two screws of adapter brackets
using a Philips screwdriver.
Then using an assistant, hang
the display on the wall plate
carefully.
Tighten the two screws of
adapter brackets using a
Philips screwdriver to secure
the adapter brackets to the
wall plate.
HEAVY!
Use an assistant
for this step.
IMPORTANT:
Make sure the TV
safely secured before
releasing.
0°
-10°
Do not exceed the maximum rated weight
specified. Otherwise, serious injury or
property damage may occur.
Version June 2020Version June 2020
To Next Page
Need help?
General
