All internal handling of the machine, except for operations
specifically described in this manual related to cleaning
processes, must be carried out by authorized technical
personnel.
Preventive cleaning and maintenance tasks must be performed
within the intervals indicated by the machine or the technical
service.
The manufacturer declines all responsibility for any possible
damage caused to the machine due to a failure to comply with
these obligations, as well as those due to incorrect or
inappropriate use.
All machine components, including the electrical connection cable,
should only be replaced by original parts. If the electrical
connection cable is damaged, it should be replaced by the
manufacturer, a service technician, or by similarly qualified
personnel to avoid any danger.
Before performing any maintenance operation, ensure the
machine is disconnected from the electric power supply by using
the installation's general switch or disconnecting the power
supply cable.
Handling
Install the grinder on a solid base
Physically, mentally, or sensorially handicapped people
or untrained people should not use this machine unless
they are supervised by a suitably qualified person.
Children are not aware of the dangers involved when
handling these machines, and therefore should be kept
away from the machine and not allowed to use it.
Do not use this machine outdoors, unless it is protected
from external elements (air, rain, fog, etc.)
Do not expose the dispenser to jets of steam or water,
including when being cleaned.
Do not touch the machine with wet, damp or bare feet,
or with wet or damp hands.
The machine should not be used for grinding products
other than those described in this manual.
Important advice
To Next Page
Loading...
Need help?
General
