grinder has two images as main screens. These two images alternate every 10 seconds. They are
identifiedwiththefollowing file names: Q10_1 andQ10_2 with bmpfileextension.
- Q10_1:Thisimageprovidesnoadditionalinformation.
-
t of the image there is a bar that indicates the operating mode which has been
selected forthegrinder;
.At thebottom rightusers canviewthenumber
of partial coffees served until that moment and the icon of the current serving can be seen in the center.
USB / LOADING IMAGES ON THE GRINDER'S SCREEN
: Copy two images from a USB memory stick to the
1.Copythetwoimagesoronlyone,accordingtotheuser'srequest,toaUSBmemorystick.Make
the respective names of the files coincide with those described above, and that they are in the following
format:
• StandardBMPfileextension(bitmapfo rmat)
• Dimensionsoftheimage320x240pixels
• Maximumsizeof 262kB.
- Tochangethe formatoftheimagewewishtouse,followtheseinstructions:
- Op entheimageusingMicrosoftOffice.
- A tthetopmenu,clickon“Image”andselecttheoption“ChangeSize”.
- Intheboxesontherightside,goto“CustomisedWidthxSize”andchoose320x240pixels.
- Clickon“Accept”.
- Inthemenuoption “File”choosetheoption“Export”,gototherightsidebox“Exportinthisfile
format”, of the two fold-down options, select “Windows Bitmap” (*. bmp) and rename the file
usingQ10_1orQ10_2.
- Lastly,clickon“Accept”.
-
2.CopytheImagefileintotherootoftheUSBmemorystick.
3. Insert the USB memory stick and follow the instructions shown below.