Quality Espresso Q10 - Page 12

With this menu option, users can activate an intensive verification in the grinder. This test consists on continuously
opening each of the traps of the coffee channels every 5 seconds, with the traps closed, grinding coffee for 1 second.
This option checks all mobile and visible elements of the grinder.
8.3.9 – ZEROING BLADE CHANGE COUNTER
EXIT
Once the grinder has reached the programmed number of servings for the blade change, proceed as follows to zero
the counter.
UNBLOCK
ZERO
STARTING TEST
PROGRAMMED
SERVINGS
PERFORMING TEST
SERVINGS REMAINING
UNTIL BLADE CHANGE
The maximum number of servings permitted
before changing the blades has been set at
150,000.
i
NEXT SCREEN
NEXT SCREEN
EXIT
The test continues
indefinitely until the exit
button is pressed
i
8.3.8 – INTENSIVE TEST
26