Quality Espresso Q10 - 8 Programming: General Diagram; 7 Internal Cleaning Cycle; Counters

- Shows the number of servings done, the doses remaining until blade change and the servings remaining
until cleaning the grinder. We can also zero the partial counters.
- 8.2.3 - SELECT BETWEEN PRE-GRINDING,
INSTANT, OR MANUAL GRINDING.
ADJUSTING DOSE TIME AND OPERATING MODE
- On this screen, the user can modify to his discretion the time used to grind doses for one or two coffees, and
choose the operating mode; Pre-grinding, Instant or manual grinding.
8.2 CONFIGURATION
PRESS TO ZERO
- 8.1.6 - SERVINGS REMAINING UNTIL CLEANING
- Pre-grinding: dispenses one previous ground dose and grinds for the next demand.
- Instant: the coffee is ground just when it is demanded.
- Manual: coffee is ground continuously while the micro remains pressed.
NEXT SCREEN
NEXT SCREEN
8.1 COUNTERS
- 8.2.1 - INCREASE OR REDUCE SINGLE DOSE
- 8.2.2 - INCREASE OR REDUCE DOUBLE DOSE
- 8.1.2 - SINGLE SERVINGS SERVED
- 8.1.5 - ZERO COUNTERS
- 8.1.4 - SERVING TOTALIZER
- 8.1.1 - SERVINGS REMAINING UNTIL BLADE CHANGE
- 8.1.3 - DOUBLE SERVINGS SERVED= 2X5=10 SERVINGS
23
GB