Coffee type
identification label
- Upon removing the hopper, the
security micro disconnects the
grinder.
Features:
Height: 610 mm.
Width: 193 mm.
Depth: 391 mm.
Weight: 16 Kg.
Hoper capacity: 1.5 Kg.
Power supply: 230 V, 50 Hz.
Nominal Power: 525 W
Hopper security micro
(optional)
The grinder is fitted with a resistant touch screen with which we can access the different menus, which allow for
functions such as:
- General on/off switch. Located under
the coffee grounds tray.
Note: Refer to Section 8 – programming, for a description on all the menus and functions of the screen.
- Check the number of doses used for one and two coffees.
- Check the number of remaining doses until change of blades.
- Check the number of doses remaining before brush cleaning.
- Configure operating mode, “Pre-grind” o “Instant” o “Manual Grind”.
- Adjust the coffee dosage
- Other functions.
To Next Page
Loading...
Need help?
General
