For this cycle, the two chutes that dispense ground coffee are opened so as to carry out a cleaning of both using the
cleaning brush provided.
To access this cycle, press the 1 coffee key and the 2 coffees key at the same time for 3 seconds. A message that
reads “CLEA” will appear on the screen and will remain there.
Internal Cleaning of the Grinder
See attached documentation
To exit this cycle, press either the one
coffee or two coffees key.
Remove the grounds tray and move the
grinder to the edge of the workspace,
until you are able to insert the cleaning
brush into the two chutes through the
one coffee and two coffees hatches to
clean both channels.
By pressing the “>” play key it is
possible to change the position of the
trap door that selects the serving of
either one or two coffees; this way the
upper part of the distributor is
accessible from both sides.
Press the one serving and two serving
keys at the same time for 3 seconds. The
“CLEA” message will appear on the
screen indicating that the grinder
cleaning cycle is running.